nRF52833 DK Development kit for nRF52833 SoC
The new SAMA5D27 Wireless System-On-Module 1 (ATSAMA5D27-WLSOM1) is a small single-sided SOM based on our high-performance System-in-Package (SiP) 32-bit Arm® Cortex®-A5 processor-based MPU SAMA5D27 with 2 Gb LPDDR2 SDRAM running up to 500 MHz. The ATSAMA5D27-WLSOM1 is built on a common set of proven Microchip components to reduce your time to market by simplifying hardware design and software development. It is delivered with a free Linux® distribution and bare metal C examples.
As well as the SiP, the SOM integrates the following:
- MCP16502 power management IC
- MIC842 voltage detector
- SST26VF064BEUI 64Mbit SQI Flash with EUI
- KSZ8081 10/100 Ethernet PHY
- DSC6102/6003 25 & 24MHz oscillators
- ATWILC3000 Wi-Fi® plus Bluetooth® (Wi-Fi/BT) Wireless module
- ATECC608A CryptoAuthentication co-processor
FEATURES
- System-In-Package (ATSAMA5D27C-LD2G-CU) Including:
- Arm® Cortex®-A5 processor-based SAMA5D27 MPU
- 2 Gbit LPDDR2-SDRAM
- On-Board Power Management Unit (MCP16502AC-E/S8B)
- 64 Mb Serial Quad I/O Flash Memory (SST26VF064BEUIT-104I/MF)
- with Embedded EUI-48™ and EUI-64™ MAC Addresses
- IEEE® 802.11 b/g/n Wi-Fi plus Bluetooth (Wi-Fi/BT) Module
- (ATWILC3000-MR110UA)
- 10Base-T/100Base-TX Ethernet PHY (KSZ8081RNAIA)
- ATECC608A-TNGTLS Secure Element
- MEMS Oscillators for Clock Generation
- 40.8 x 40.8 mm Module, Pitch 0.8mm, Solderable Manually for
- Prototyping
- 94 I/Os
- Up to 7 Tamper Pins
- One USB Device, one USB Host and one HSIC Interface
- Shutdown and Reset Control Pins
- Independent Power Supplies Available for Camera Sensor, for SD Card
- and for Backup Depending on Voltage Domains
- Operational Specifications:
- Main operating voltage: 3.0V to 5.5V ± 5%
- Temperature range: -40°C to 85°C
- Integrated oscillators, internal voltage regulators
- Multiple interfaces and I/Os for easy application development
APPLICATIONS
- Industrial Control and Automation
- Smart Appliances
- Human Machine Interfaces (HMI)
- IoT Gateway
- Access Control Panels
- Security and Alarm Systems
Related Articles
SmartPressure™ ICP-10125 TDK Barometric Pressure Sensor
TDK InvenSense’s barometric pressure sensors use an innovative capacitive MEMS architecture to deliver lower power consumption and lower noise than competing technologies. The SmartPressure products can measure height change as small as 5 cm, less than the height of a...
The World’s First High Performance Mass Flow Controller by Sensirion
SFC5500 mass flow controller series represent the culmination of Sensirion’s excellent 20-year track record in precision control of gas flow. The sensor is based on the microthermal measurement principle and makes use of Sensirion’s proven CMOSens® MEMS Technology....
HID TouchChip® TCET Silicon Fingerprint Module
The TouchChip® TCET module is compact, cost effective and easy to integrate. The on-board processor is used for capture and match, delivering fast and accurate results. It can store up to approximately 100 user templates and supports USB, SPI or UART interfaces. Power...
Stay Up to Date With The Latest News & Updates
Join Our Newsletter
Join our monthly newsletter for the latest updates in the electronics industry