June 19, 2020
The nRF52805 System-on-Chip (SoC) augments the industry-leading nRF52 Series with an SoC in a WLCSP optimized for small two-layer PCB designs, ideal for cost-constrained applications. It is the perfect choice for applications such as beacons, disposable medical devices, sensors, styluses and presenters.
The nRF52805 features an Arm® Cortex®-M4 processor, clocked at 64 MHz. It has 192 KB Flash and 24 KB RAM and integrates a range of analog and digital interfaces such as a 2-channel 12-bit ADC, SPI, UART, and TWI.
The nRF52805 is a Bluetooth 5.2 SoC supporting Bluetooth Low Energy and 2.4 GHz proprietary protocols. It is capable of Bluetooth high-throughput 2 Mbps, transferring data faster and more efficient, and Bluetooth channel selection algorithm #2 (CSA #2), improving coexistence and reducing interference. It also supports 2.4 GHz proprietary protocols. The radio has up to 4 dBm TX power and -97 dBm sensitivity (1 Mbps Bluetooth LE).
The nRF52805 is available in our smallest package, a 2.48×2.46 mm WLCSP, optimized for two-layer PCB designs. This enables designs that are small and low cost, attributes that are typically a design trade-off, since small designs typically require four-layer PCBs, which have significantly higher cost. We provide a 9.5×8.8 mm reference layout with all ten GPIOs available, requiring only 10 external passive components (inc. two crystal load capacitors).
The nRF52805 is supported by SoftDevice S112, and will be supported by SoftDevice S113. S112 and S113 are memory-optimized Peripheral-only Bluetooth Low Energy protocol stacks supporting up to 4 connections as a Peripheral concurrently with a Broadcaster. A guide on how to use nRF52805 with nRF5 SDK is available here. The nRF52 DK is the recommended development kit, it emulates the nRF52805, and can be used as a starting point for development before moving over to a custom board.
- 64 MHz Arm Cortex-M4
- 192 KB Flash + 24 KB RAM
- Bluetooth Low Energy
- Bluetooth 5.2
- High-throughput 2 Mbps
- Channel selection algorithm #2
- 2.4 GHz proprietary protocol support
- Ultra-low-power 2.4 GHz multiprotocol radio
- +4 dBm TX power
- -97 dBm RX sensitivity
- 4.6 mA in TX (0 dBm)
- 4.6 mA in RX (1 Mbps)
- Integrated balun with single-ended output
- SPI, TWI, UART
- 2-channel 12-bit ADC
- Integrated DC/DC regulator
- 0.3 µA in System OFF
- 1.1 µA in System ON with 24 KB RAM retained and RTC running
- Optimized for small two-layer PCB designs
- 2.48×2.46 mm WLCSP package
- Significanly lower cost than four-layer PCB designs
- Only 10 external passive components
- 9.5×8.8 mm reference layout is available, giving access to all 10 GPIOs
The high-precision addition to the GNSS xE868 family provides multi-frequency and multi-constellation support The high-precision GNSS SE868SY-D is a new multi-frequency, multi-constellation positioning receiver capable of combining GPS/QZSS and Galileo in the L1/E1...
Nordic Semiconductor just released a new version of the nRF Connect SDK, v1.5.0. For the nRF5340 System-on-Chip (SoC) Thread is now supported for production and Zigbee and Bluetooth mesh are supported for development. All models in the Bluetooth Mesh Models v1.0.x...
Join us on March 3 at 12:00PM AEDT as we discuss ways to design and engineer the perfect cellular IoT (cIoT) solution that meets today’s demanding low power requirements. This webinar is a collaborative effort between Glyn High Tech, Nordic Semiconductors, Entech...
Stay Up to Date With The Latest News & Updates
Join Our Newsletter
Join our monthly newsletter for the latest updates in the electronics industry